When we use the Hydraulic Heavy Truck Car Lift, we should always check, maintain and maintain it, which will not only extend the service life of the Hydraulic Heavy Truck Car Lift, but also make it work more powerful!
The Luxmain Hydraulic Heavy Truck Lift is a ground-column lift that can be designed with a lift weight of 15-60 tons according to your needs. It can be double-column, three-column and four-column. The PLA system detects the synchronism of each lift column, and if it is not synchronized, it automatically synchronizes to make the lift column synchronized.
LUXMAIN was founded in 2007, Equipped with over 100 sets of advanced manufacturing equipments and precision inspection instruments, LUXMAIN dedicates in the design & development, manufacturing and services of inground lifts, hydraulic cylinder and hydraulic control system. The annual production capacity in inground car lifts reaches 10,000 sets, specialized high pressure oil cylinders reaches 40,000 pieces and hydraulic control system reaches 10,000 sets. The products are mainly car jack lift, Quick Lift, Inground Lift, etc. Our products are widely applied in Automotive Industry, Vehicle maintenance, Construction machinery etc.
Companies keep the direction of "professional, standards ,innovation", guided by technological innovation, quality assurance as a guarantee, to provide users with safe, accurate and efficient standardized products, personalized customization.
Buy Hydraulic Heavy Truck Car Quick Lift Equipment Maintenance and Maintenance
1. The brakes of each mechanism should be checked frequently and the gap between the brake shoes and the brake wheel should be adjusted to ensure flexibility and reliability. On the friction surface, there should be no dirt, and the dirt must be washed away with gasoline or thinner.
2. Lubrication and hydraulic oil of various parts such as gearbox, gearbox and external gear are in accordance with the requirements in the lubrication table.
3. Pay attention to check whether there is broken wire or loose strands in each wire rope. If it exceeds the relevant regulations, it must be replaced immediately.
4. Always check the connection of each part, if it is loose, it should be tightened.
5. Check that the Hydraulic Heavy Truck Car Lift is functioning properly and that there is no noise. If a fault is found, it must be eliminated in time.
1.What is the height of high palm equipped with the quick lift ?
It can be up to 460mm equipped with rubber block ，can be up to 560mm with high palm
2.What is the temperature that he quick lift need 46# hydraulic oil? Use which hydraulic oils below this temperature?
3.Recommendation: Use 46# anti-wear hydraulic oil when the local average temperature is less than -10 °C. It is recommended to use 32# anti-wear hydraulic oil when it is less than -10 °C.
What is the motor power of the quick lift?
12V power unit needs 1600W，220Vpower unit needs 750W。
4.Can the inverter be used with the 12V or 220V quick lift? any size can be used?
5.Inverter can be used. 220V can be converted to 12V and DC transformer is available. 220V power unit needs to use 12V to become 220V inverter, and the power needs to be greater than 1.5KW. In the same way, if the generator is used to drive 220V, the power is also required to be greater than 1.5KW.
Can a quick lift make a taller lifting frames?
This product is not customized, more product models please look through official website.
+86 535 6736715
Yantai Luxmain Car Lift Co., Ltd. products include:Movable Car Lift,Electric Car Lift,Off-road Car Lift,Two Post Car Lift,Single Post Car Lift,Single Post Hydraulic Lift,Hydraulic Inground Car Lift,One Post Car Washing Lift,Hydraulic Lifter,Heavy Truck Lift,Car Lift 2 Post